Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module Configuration Guide - Page 90

www.dell.com | support.dell.com Figure 5-16 shows a prefix list in which the sequence numbers were assigned by the software. The filters were assigned sequence numbers based on the order in which they were configured (for example, the first filter was given the lowest sequence number). The show config command in PREFIX LIST mode displays the two filters with the sequence numbers 5 and 10. Figure 5-16. Prefix List FTOS(conf-nprefixl)#permit 123.23.0.0 /16 FTOS(conf-nprefixl)#deny 133.24.56.0 /8 FTOS(conf-nprefixl)#show conf ! ip prefix-list awe seq 5 permit 123.23.0.0/16 seq 10 deny 133.0.0.0/8 FTOS(conf-nprefixl)# To delete a filter, enter the show config command in PREFIX LIST mode and locate the sequence number of the filter you want to delete; then use the no seq sequence-number command in PREFIX LIST mode. To view all configured prefix lists, use either of the following commands in EXEC mode (Figure 5-17) and (Figure 5-18): Command Syntax show ip prefix-list detail [prefix-name] show ip prefix-list summary [prefix-name] Command Mode EXEC Privilege EXEC Privilege Purpose Show detailed information about configured Prefix lists. Show a table of summarized information about configured Prefix lists. Figure 5-17. Command example: show ip prefix-list detail FTOS>show ip prefix detail Prefix-list with the last deletion/insertion: filter_ospf ip prefix-list filter_in: count: 3, range entries: 3, sequences: 5 - 10 seq 5 deny 1.102.0.0/16 le 32 (hit count: 0) seq 6 deny 2.1.0.0/16 ge 23 (hit count: 0) seq 10 permit 0.0.0.0/0 le 32 (hit count: 0) ip prefix-list filter_ospf: count: 4, range entries: 1, sequences: 5 - 10 seq 5 deny 100.100.1.0/24 (hit count: 0) seq 6 deny 200.200.1.0/24 (hit count: 0) seq 7 deny 200.200.2.0/24 (hit count: 0) seq 10 permit 0.0.0.0/0 le 32 (hit count: 0) FTOS> Figure 5-18. Command Example: show ip prefix-list summary FTOS>show ip prefix summary Prefix-list with the last deletion/insertion: filter_ospf ip prefix-list filter_in: count: 3, range entries: 3, sequences: 5 - 10 ip prefix-list filter_ospf: count: 4, range entries: 1, sequences: 5 - 10 FTOS> 88 | Access Control Lists (ACLs)