Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module Configuration Guide - Page 460

www.dell.com | support.dell.com Configure RMON Collection History To enable the RMON MIB history group of statistics collection on an interface, use the rmon collection history command in CONFIGURATION INTERFACE (conf-if) mode. To remove a specified RMON history group of statistics collection, use the no rmon collection history command. Command Syntax [no] rmon collection history {controlEntry integer} [owner owner-string] [buckets bucket-number] [interval seconds] Command Mode Purpose CONFIGURATION INTERFACE (conf-if) controlEntry: Specifies the RMON group of statistics using a value. integer: A value from 1 to 65,535 that identifies the RMON group of statistics. The value must be a unique index in the RMON History Table. owner: (Optional) Specifies the name of the owner of the RMON group of statistics. The default is a null-terminated string. owner-string: (Optional) Records the name of the owner of the RMON group of statistics. buckets: (Optional) Specifies the maximum number of buckets desired for the RMON collection history group of statistics. bucket-number: (Optional) A value associated with the number of buckets specified for the RMON collection history group of statistics. The value is limited to from 1 to 1000. Default is 50 (as defined in RFC-2819). interval: (Optional) Specifies the number of seconds in each polling cycle. seconds: (Optional) The number of seconds in each polling cycle. The value is ranged from 5 to 3,600 (Seconds). The default is 1,800 as defined in RFC-2819. Enable an RMON MIB Collection History Group The command in Figure 26-4 enables an RMON MIB collection history group of statistics with an ID number of 20 and an owner of "john", both the sampling interval and the number of buckets use their respective defaults. Figure 26-4. rmon collection history Command Example FTOS(conf-if-te-0/40)#rmon collection history controlEntry 20 owner john 458 | Remote Monitoring (RMON)