Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module Configuration Guide - Page 68

www.dell.com | support.dell.com Figure 4-7. Configuring EXEC Timeout FTOS(conf)#line con 0 FTOS(conf-line-console)#exec-timeout 0 FTOS(conf-line-console)#show config line console 0 exec-timeout 0 0 FTOS(conf-line-console)# Telnet to Another Network Device To telnet to another device (Figure 4-8): Task Command Syntax Telnet to the stack-unit.You do not need to configure the management port on the stack-unit to be able to telnet to it. Telnet to a device with an IPv4 address. If you do not enter an IP address, FTOS enters a Telnet dialog that prompts you for one. • Enter an IPv4 address in dotted decimal format (A.B.C.D) telnet-peer-stack-unit telnet [ip-address] Command Mode EXEC Privilege EXEC Privilege Figure 4-8. Telnet to Another Network Device FTOS# telnet 10.11.80.203 Trying 10.11.80.203... Connected to 10.11.80.203. Exit character is '^]'. Login: Login: admin Password: FTOS>exit FTOS#telnet 2200:2200:2200:2200:2200::2201 Trying 2200:2200:2200:2200:2200::2201... Connected to 2200:2200:2200:2200:2200::2201. Exit character is '^]'. FreeBSD/i386 (freebsd2.force10networks.com) (ttyp1) login: admin FTOS# Lock CONFIGURATION Mode FTOS allows multiple users to make configurations at the same time. You can lock CONFIGURATION mode so that only one user can be in CONFIGURATION mode at any time (Figure 4-9). 66 | Management