Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module Configuration Guide - Page 70

www.dell.com | support.dell.com You can then send any user a message using the send command from EXEC Privilege mode. Alternatively you can clear any line using the clear command from EXEC Privilege mode. If you clear a console session, the user is returned to EXEC mode. Recovering from a Forgotten Password If you configure authentication for the console and you exit out of EXEC mode or your console session times out, you are prompted to re-enter the password. If you forget your password, follow these steps: Step 1 2 3 4 5 6 7 8 9 10 11 Task Command Syntax Command Mode Log onto the system using the console. Power-cycle the chassis by switching off all of the power modules and then switching them back on. Hit any key to abort the boot process. You enter uBoot i mme id at ely, as indicated by the => prompt. hit any key (during bootup) Set the system parameters to ignore the startup configuration file when the system reloads. setenv stconfigignore true uBoot To save the changes use the saveenv saveenv command. uBoot Reload the system. reset uBoot Copy startup-config.bak to the running config. copy flash://startup-config.bak running-config EXEC Privilege Remove all authentication statements no authentication login you might have for the console. no password LINE Save the running-config. copy running-config startup-config EXEC Privilege Set the system parameters to use the startup configuration file when the system reloads. setenv stconfigignore false uBoot Save the running-config. copy running-config startup-config EXEC Privilege Recovering from a Forgotten Enable Password If you forget the enable password, follow these steps: Step 1 Task Log onto the system via console. Command Syntax Command Mode 68 | Management