Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module Configuration Guide - Page 47

Configuration File Management You can store on and access files from various storage media. Rename, delete, and copy files on the system from EXEC Privilege mode. Note: Using flash memory cards in the system that have not been approved by Dell Force10 can cause unexpected system behavior, including a reboot. Copy Files to and from the System The command syntax for copying files is similar to UNIX. The copy command uses the format copy source-file-url destination-file-url. Note: For a detailed description of the copy command, refer to the FTOS Command Reference Guide. • To copy a local file to a remote system, combine the file-origin syntax for a local file location with the file-destination syntax for a remote file location (Table 3-2). • To copy a remote file to a Dell Force10 system, combine the file-origin syntax for a remote file location with the file-destination syntax for a local file location (Table 3-2). Table 3-2. Forming a copy Command source-file-url Syntax Local File Location Internal flash: flash copy flash://filename USB flash: usbflash usbflash://filename Remote File Location FTP server copy ftp://username:password@{hostip | hostname}/filepath/filename TFTP server SCP server copy tftp://{hostip | hostname}/filepath/ filename copy scp://username:password@{hostip | hostname}/filepath/filename destination-file-url Syntax flash://filename usbflash://filename ftp://username:password@{hostip | hostname}/ filepath/filename tftp://{hostip | hostname}/filepath/filename scp://username:password@{hostip | hostname}/ filepath/filename Important Points to Remember • You may not copy a file from one remote system to another. • You may not copy a file from one location to the same location. • When copying to a server, you can only use a hostname if a DNS server is configured. Getting Started | 45