Epson T3270 User Manual - Page 142

Epson SureColor T-Series User's Guide Using the Control Panel Menu Item Less Head Scuffing Drying Time Per Page Paper Size Check Paper Skew Check Store Held Job*2, *3 USB Timeout HP-GL/2 Settings Item Quality Description On Off* Off to 60 minutes (Off*) On* Off On* Off On Off* 10 to 600 seconds (10*) If the paper is thick, the print head may scuff the print surface. Choose On to prevent scuffing. This option can be used to temporarily change the value selected for Custom Paper Setting > Platen Gap in the Paper menu. Note, however, that On has no effect when Wider is selected for Platen Gap. Specify how long the printer pauses to allow the ink to dry after printing each page; choose from values between 0 and 60 minutes. Depending on the ink density or paper type, the ink may take a while to dry. If the ink blurs on the paper, set a longer time for drying the ink. The longer the drying time, the more time required for printing. Choose whether the printer automatically detects (On) or does not detect (Off) the paper width. Try choosing Off if a paper setting error is displayed when the paper is correctly loaded. Note, however, that the printer may print outside the paper when Off is selected. If it prints beyond the edges of the paper, the inside of the printer becomes dirty with ink. We generally recommend to operate with this setting set to On. If On is selected, an error will be displayed in the control panel and printing will stop if the paper is skewed; select Off to disable this feature. On is recommended in most circumstances as skewed paper may cause the printer to jam. This setting is displayed if an optional hard disk unit or Adobe PostScript 3 Expansion Unit is connected. If On is selected, print jobs that require a paper type, source, or output paper size (width) that differs from those currently selected with the printer will be saved as held jobs; select Off to disable this feature. If Off is selected, an error will be displayed and will printing will stop if the source selected for the print job does not match that selected with the printer. When On is selected, printing will not stop if an error occurs; instead, jobs with non-matching settings will be saved to the hard disk unit or Adobe PostScript 3 Expansion Unit as held jobs. Held jobs can be printed from the Print Queue menu after the printer has been readied by, for example, loading the correct type of paper. U"Function Summary" on page 67 If printing stops mid-way when the printer and computer are connected by a USB cable, set a longer time. Description Speed Fine* Choose Print Quality in view of image quality and print speed. 142