Epson T3270 User Manual - Page 84
Printing at Non-Standard Sizes
View all Epson T3270 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Epson SureColor T-Series User's Guide More Ways to Print Printing at Non-Standard Sizes Before printing at non-standard sizes, including vertical or horizontal banners and documents with equal sides, save the desired paper size in the printer driver. Once they have been saved in the printer driver, custom sizes can be selected in the application Page Setup and other print dialogs. U"Basic Printing Methods (Windows)" on page 57 The following sizes can be used. Paper Width Length*2 T7270/T7270D 89 to 1,118 mm T5270/T5270D T3270 89 to 914 mm 89 to 620 mm*1 Windows: 127 to 15,000 mm Mac OS X: 127 to 15,240 mm *1. The maximum printable width is 610 mm. *2. The paper length can be longer if using applications that support banner printing. However, the actual print size depends on the application, the paper size loaded in the printer, and the computer environment. c Important: O The smallest size supported by the printer is 254 mm wide × 127 mm long. If a smaller size is entered in the printer driver as a Custom Paper Size, the document will print with wider-than-expected margins, which must be trimmed. O For Mac OS X Custom Paper Sizes, although you can specify a large paper size which cannot be loaded on this printer, it will not be printed properly. O The available output size is limited depending on the application. Making Settings in Windows 1 Display the printer driver's Printer Settings tab and click the Custom Paper Size. c Important: Custom Paper Size is not available when Front - Poster Board is selected for Source. 2 Enter the desired size in the User Defined Paper Size dialog and click Save. O You can enter up to 24 single-byte characters for the Paper Size Name. O To view Paper Width and Paper Height values for a standard size close to the desired custom size, select the appropriate option for Base Paper Size. O If you specify the desired Fix Aspect Ratio and select Landscape or Portrait for Base, you need only enter either the Paper Width or Paper Height. 84