Epson T3270 User Manual - Page 170

Roll Switch Condition, Paper Size Check

Get Epson T3270 PDF manuals and user guides View all Epson T3270 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 170 highlights

Epson SureColor T-Series User's Guide Problem Solver Messages Paper Size Error Loaded paper is not supported size. Paper Sensor Error Loaded paper or print out has a problem. Refer to manual for details. Roll Setting Error Specified roll paper is not loaded. Continue to print with paper currently loaded? Paper Type Error Cannot switch to specified roll paper because paper type is different. Continue to print with paper currently loaded? Paper Width Error Cannot switch to specified roll paper because paper width is different. Continue to print with paper currently loaded? What to do The loaded paper width is not supported. Press the Z button and remove the paper. Paper for use in the printer must be at least 254 mm wide. Use paper that is at least 254 mm wide. Should this message be displayed with paper of a width that can be used in the printer, you may be able to print if you select Off for Paper Size Check in the Setup menu. U"Setup menu" on page 139 Press the W button to clear the error from the control panel. If this error is displayed when performing automatic head alignment, check the following items. O Does the paper support auto head alignment? Head alignment is not available with transparent or colored media, tracing paper, paper not supported by the auto head alignment function, or paper that is 1.0 mm or more thick. See the following for information on the types of paper that support auto head alignment. U"Epson Special Media Table" on page 187 O Are outside light sources interfering with the process? If the printer is exposed to direct sunlight or another light source that causes optical interference, shade the printer from these sources. O Are the default values selected for both Platen Gap and Less Head Scuffing? Restore both items to their default values. O Are some print head nozzles clogged? Perform head cleaning. U"Head Cleaning" on page 157 If this error is displayed in circumstances other than those listed above, check that the printer supports the current paper. In Source of the printer driver, roll paper which is not loaded is selected. If the Z button is pressed, the printer is forced to print using the loaded roll paper. If the ( button is pressed, paper can be loaded. The Media Type setting of the printer driver and the paper type of the roll paper loaded on the printer are different. If the Z button is pressed, the printer prints to the roll paper currently in use. If the ( button is pressed, paper can be switched. If you want to switch a roll paper even though it is a different type, open the Setup menu, and then under Roll Switch Condition, change Paper Type to Disable. U"Setup menu" on page 139 The Source setting of the printer driver and the width of the roll paper loaded on the printer are different. If the Z button is pressed, the printer prints to the roll paper currently in use. If the ( button is pressed, paper can be switched. If you want to switch a roll paper even though it is a different paper width, open the Setup menu, and then under Roll Switch Condition, change Paper Width to a setting other than Width Match. U"Setup menu" on page 139 170

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
Epson SureColor T-Series User’s Guide
Problem Solver
170
Paper Size Error
Loaded paper is not supported
size.
The loaded paper width is not supported. Press the
Z
button and remove the paper.
Paper for use in the printer must be at least 254 mm wide. Use paper that is at least 254
mm wide.
Should this message be displayed with paper of a width that can be used in the printer,
you may be able to print if you select
Off
for
Paper Size Check
in the Setup menu.
U
“Setup menu” on page 139
Paper Sensor Error
Loaded paper or print out has a
problem.
Refer to manual for details.
Press the
W
button to clear the error from the control panel.
If this error is displayed when performing automatic head alignment, check the
following items.
O
Does the paper support auto head alignment?
Head alignment is not available with transparent or colored media, tracing paper,
paper not supported by the auto head alignment function, or paper that is 1.0 mm
or more thick.
See the following for information on the types of paper that support auto head
alignment.
U
“Epson Special Media Table” on page 187
O
Are outside light sources interfering with the process?
If the printer is exposed to direct sunlight or another light source that causes optical
interference, shade the printer from these sources.
O
Are the default values selected for both
Platen Gap
and
Less Head Scuffing
?
Restore both items to their default values.
O
Are some print head nozzles clogged?
Perform head cleaning.
U
“Head Cleaning” on page 157
If this error is displayed in circumstances other than those listed above, check that the
printer supports the current paper.
Roll Setting Error
Specified roll paper is not loaded.
Continue to print with paper
currently loaded?
In
Source
of the printer driver, roll paper which is not loaded is selected.
If the
Z
button is pressed, the printer is forced to print using the loaded roll paper.
If the
(
button is pressed, paper can be loaded.
Paper Type Error
Cannot switch to specified roll
paper because paper type is
different.
Continue to print with paper
currently loaded?
The
Media Type
setting of the printer driver and the paper type of the roll paper loaded
on the printer are different.
If the
Z
button is pressed, the printer prints to the roll paper currently in use.
If the
(
button is pressed, paper can be switched.
If you want to switch a roll paper even though it is a different type, open the Setup menu,
and then under
Roll Switch Condition
, change
Paper Type
to
Disable
.
U
“Setup menu” on page 139
Paper Width Error
Cannot switch to specified roll
paper because paper width is
different.
Continue to print with paper
currently loaded?
The
Source
setting of the printer driver and the width of the roll paper loaded on the
printer are different.
If the
Z
button is pressed, the printer prints to the roll paper currently in use.
If the
(
button is pressed, paper can be switched.
If you want to switch a roll paper even though it is a different paper width, open the
Setup menu, and then under
Roll Switch Condition
, change
Paper Width
to a setting
other than
Width Match
.
U
“Setup menu” on page 139
Messages
What to do