Epson T3270 User Manual - Page 31

Loading Roll 2 (T7270D/T5270D only), c

Page 31 highlights

Epson SureColor T-Series User's Guide Basic Operations Loading Roll 2 (T7270D/T5270D only) Buttons that are used in the following settings 4 Confirm that the roll paper lock lever is raised. 5 Place the roll paper adapters on the adapter guides so the flat surfaces of the adapters is facing down. Next, following the adapter guides, slide the roll slowly inside. 1 Lower the paper basket to the horizontal position. U"Adjusting the Position" on page 50 2 Press the ( button on the control panel. Use the d/u buttons to select Roll 2 and press the Z button. 3 Hold the drawer handles of Roll 2 unit, and then pull the unit out. 6 Make sure that the roll paper is free of slack and the end is not folded, and then insert it into the paper slot. c Important: Do not pull out the Roll 2 unit unless you are instructed to do so by the control panel screen. If the unit is carelessly pulled out while paper is loaded, paper jams or paper damage may occur. 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213

Epson SureColor T-Series User’s Guide
Basic Operations
31
Loading Roll 2
(T7270D/T5270D only)
Buttons that are used in the following settings
1
Lower the paper basket to the horizontal
position.
U
“Adjusting the Position” on page 50
2
Press the
(
button on the control panel.
Use the
d
/
u
buttons to select
Roll 2
and press
the
Z
button.
3
Hold the drawer handles of Roll 2 unit, and then
pull the unit out.
4
Confirm that the roll paper lock lever is raised.
5
Place the roll paper adapters on the adapter
guides so the flat surfaces of the adapters is
facing down. Next, following the adapter guides,
slide the roll slowly inside.
6
Make sure that the roll paper is free of slack and
the end is not folded, and then insert it into the
paper slot.
c
Important:
Do not pull out the Roll 2 unit unless you
are instructed to do so by the control panel
screen. If the unit is carelessly pulled out
while paper is loaded, paper jams or paper
damage may occur.