Epson T3270 User Manual - Page 43

Epson SureColor T-Series User's Guide Basic Operations Viewing and Changing Media Settings After the paper is loaded, the control panel screen shows the media type currently selected with the printer. Note: If On is selected for Roll Paper Remaining and roll paper with a barcode for roll data is loaded, the printer will read the barcode and adjust settings automatically. Follow the steps below to change the settings displayed. If you are using the T7270D/T5270D, settings are retained for each loaded roll paper (Roll 1/Roll 2). Buttons that are used in the following settings 1 Use the d/u buttons to select Change Settings and press the Z button. If you will print with the displayed media type, select Keep Settings Above, and press the Z button. Next, proceed to Step 5. Imformation Selected Paper Type : Plain Paper Keep Settings Above Change Settings Proceed 2 Select the media type, and then press the Z button. 3 Select the media name, and then press the Z button. 4 If On is selected for Roll Paper Remaining, you will be prompted to enter the length of the roll. Press the d/u buttons to choose a value between 5.0 and 150 m and press the Z button. You can set in 0.5 m increments. If you press the r button, you can change Roll Paper Remaining to Off. To change the setting back to On, use Roll Paper Remaining in the Paper menu. U"Paper menu" on page 134 The printer will display Ready after a brief pause, showing that it is ready to print. Send the data to be printed from the computer. Roll Paper Remaining When On is selected for Roll Paper Remaining, the printer tracks the following roll paper data. O Time until replacement The following settings are recorded in a barcode printed on the roll. The amount of paper remaining, the value selected for remaining alert, and the paper type. The barcode is automatically printed at the end of the roll when the roll is rewound. The barcode is automatically read and settings adjusted the next time the paper is used, improving efficiency when multiple rolls of paper are used. O Tracking the amount of paper remaining in the . tab info display area The info display area shows the amount of paper remaining in the current roll. Once the amount of paper remaining falls below the limit, the amount is replaced by a warning indicator showing that paper is running low. U"Screen View" on page 15 O Printing Availability The printer predicts whether the current job can be printed on the amount of paper remaining and 43