Epson T3270 User Manual - Page 74

Epson SureColor T-Series User's Guide Copying and Scanning O Documents with rips How to Load Documents Before you load a document with the thickness of 0.25 mm or larger, carry out the following three actions. Remove the paper eject guides (when document thickness is 0.25 mm or more) Remove all paper eject guides of the scanner. If the paper eject guides are left attached, the document will strike them and not be ejected. document thickness is 0.25 mm or more) When the document is read, it is pushed out forward and backward. The approximate amount of space required is shown below. If the printer is set up near a wall, make sure there is enough space at the rear. Paper Size A2 A1 24 × 30 inch 30 × 40 inch Forward (a) 185mm 432mm 353mm 607mm Backward (b) 220mm 467mm 388mm 642mm Loading documents 1 Align the loading guide with the document loading position. To ensure that the document is not fed on an angle, we recommend inserting the long side of the document. Set the document eject direction to forward (when document thickness is 0.25 mm or more) Make sure the document eject direction is forward. If the document is ejected backward with the paper eject guides removed, the document will fall to the rear side and be damaged by folding or dirt. U"Changing the document eject direction" on page 77 Ensure forward and backward space (when 74