HP Integrity rx2800 HP Insight Management WBEM Provider Events Reference Guide - Page 105
HP Ethernet Events, Source in Windows Event Log
View all HP Integrity rx2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
14730 Warning 14744 Warning 14748 Warning 14749 Warning 14812 Warning 14841 Error 14843 Error 14854 Warning 14876 Warning 14909 Warning 14910 Warning SFW discarded one or more in progress SFW events before they got logged by iLO. Probable Cause: The SFW event queue overflowed and remained that way for a duration of time. This could result from poor iLO queue draining (logging) performance, or could be related to the number of event being issued by SFW in a short period of time. Recommended Action: None. WBEM EventID: 10166. WBEM ProviderName: FPL_IndicationProvider. The iLO config was unexpectedly defaulted. Settings may need to be re-entered. Probable Cause: Some bad data in the iLO config area of NVRAM was detected and as a result config was defaulted. It is not believe that this was caused by a battery failure or user action. Recommended Action: Re-enter any lost configuration data. WBEM EventID: 10172. WBEM ProviderName: FPL_IndicationProvider. The local blade failed to power off upon request. Probable Cause: This blade has failed to power off. Recommended Action: Try resetting iLO and attempting power off again. WBEM EventID: 10175. WBEM ProviderName: FPL_IndicationProvider. The system has failed to power off upon request. Probable Cause: the rack or one or more blades have failed to power off. The overall power off action has failed as a result. Recommended Action: reset iLO and attempt power off again. WBEM EventID: 10176. WBEM ProviderName: FPL_IndicationProvider. A data table stored in non-volatile RAM is invalid. Probable Cause: Manageability or System FW revisions are out of date or corrupted. Recommended Action: Ensure that all firmware in the system is up to date. WBEM EventID: 10223. WBEM ProviderName: FPL_IndicationProvider. The system has lost AC power. Probable Cause: Most likely cause is removal of an AC power cord, or a bulk power supply failure. Recommended Action: Make sure that the AC Power cord is properly installed, and the bulk power supply is functional. WBEM EventID: 10359. WBEM ProviderName: FPL_IndicationProvider. The chassis has been open for an extended period of time. Probable Cause: The chassis dorr or top cover is open. More specifically it has been open for an extended period of time. Recommended Action: Close the door or top cover. WBEM EventID: 10405. WBEM ProviderName: FPL_IndicationProvider. The Power Button was asserted prior to changing the system power. Probable Cause: The power button must be released before remotely controlling system power. The button may be stuck. Recommended Action: Inspect the power button and correct anything which may affect its proper operation. WBEM EventID: 10366. WBEM ProviderName: FPL_IndicationProvider. ICH failed to respond to an i2c query. Probable Cause: The ICH device failed to respond to an i2c request. It is probable that the ICH device is in a failed state. Recommended Action: Investigate the ICH MEZZ card to determine if there has been a failure. WBEM EventID: 10384. WBEM ProviderName: FPL_IndicationProvider. Excessive processor corrected errors. Probable Cause: Processor module is failing or failed. Recommended Action: Replace the processor module. WBEM EventID: 10398. WBEM ProviderName: FPL_IndicationProvider. A processor has mapped out all spare cache lines. Probable Cause: The processor is not functioning properly due to excessive cache errors. Recommended Action: Replace the processor. The processor is at physical location. WBEM EventID: 10400. WBEM ProviderName: FPL_IndicationProvider. HP Ethernet Events Source in Windows Event Log: HP Ethernet Event ID Event Severity 1 Error 2 Error Event Description An Ethernet provider encountered an unrecoverable error. A network interface has failed. An Ethernet adapter's status changed from OK to Error, or an Ethernet team's status changed to Error from another state. HP Ethernet Events 105