HP Integrity rx2800 HP Insight Management WBEM Provider Events Reference Guide - Page 35
MC: I/O error log/clear error. Probable Cause: SFW's Machine Check Handler was
View all HP Integrity rx2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
5626 5638 5646 5655 5656 5657 5658 5659 5677 5679 5682 5683 Error Warning Warning Warning Warning Warning Warning Warning Warning Warning Warning Warning The PD cannot boot, a majority of cells did not arrive at Rendezvous. Probable Cause: PD Rendezvous Boot Rules: If greater than 50% of the assigned cells are rendezvoused, we will boot. If less than 50% of the assigned cells are rendezvoused, don't boot. If exactly 50% of the assigned cells are rendezvoused, including all of the preferred core cells, we will boot. If exactly 50% have rendezvoused, and there is a specified preferred core cell not rendezvoused, don't boot. If exactly 50% have rendezvoused, and there are no preferred core cells, don't boot. If any of the above apply in preventing the boot. Reconfigure the PD and reboot. WBEM EventID: 437. WBEM ProviderName: FPL_IndicationProvider. INIT: Monarch failed in slave rendezvous. Probable Cause: A processor has failed rendezvous. Recommended Action: Reboot if necessary, if problem persists contact your HP representative for support. WBEM EventID: 439. WBEM ProviderName: FPL_IndicationProvider. MC: I/O error log/clear error. Probable Cause: SFW's Machine Check Handler was unable to log or clear I/O error registers. Recommended Action: Reboot if necessary, if problem persists contact your HP representative for support. WBEM EventID: 440. WBEM ProviderName: FPL_IndicationProvider. MC: MCA to BERR escalation not supported by PAL. Probable Cause: Cannot escalate an MCA to BERR. Recommended Action: Analyze Machine Check Logs using diagnostic tools and EFI tools. WBEM EventID: 441. WBEM ProviderName: FPL_IndicationProvider. MC: MCA to BINIT escalation not supported by PAL. Probable Cause: Cannot escalate an MCA to BINIT. Recommended Action: Analyze Machine Check Logs using diagnostic tools and EFI tools. WBEM EventID: 442. WBEM ProviderName: FPL_IndicationProvider. MC: Get PAL features failed. Probable Cause: SFW failed to get the feature set from PAL. Recommended Action: Update firmware to get newer PAL that support the PAL_GET_FEATUREs call. WBEM EventID: 443. WBEM ProviderName: FPL_IndicationProvider. MC: Previous PAL rendezvous failed; rebooting. Probable Cause: PAL Failed to rendezvous the processors during a MCA. Recommended Action: Review error logs to determine cause of MCA. If problem persists, contact HP support to troubleshoot the problem. WBEM EventID: 444. WBEM ProviderName: FPL_IndicationProvider. MC: Set PAL features failed. Probable Cause: SFW failed to set the feature set from PAL. Recommended Action: update newer system firmware with the new PAL that support the PAL_SET_FEATURES call. WBEM EventID: 445. WBEM ProviderName: FPL_IndicationProvider. MC: Monarch failed in slave rendezvous. Probable Cause: A slave failed to rendezvous. Recommended Action: Reboot if necessary, if problem persists contact your HP representative for support. WBEM EventID: 446. WBEM ProviderName: FPL_IndicationProvider. MC_RENDEZVOUS: Rendezvous vector out of range. Probable Cause: A bad rendezvous vector has been registered. Recommended Action: Reboot if necessary to re-register vector, if problem persists contact your HP representative for support. WBEM EventID: 447. WBEM ProviderName: FPL_IndicationProvider. MC_RENDEZVOUS: No MC monarch. Probable Cause: Software is making a SAL_MC_RENDEZVOUS call when it shouldn't. Recommended Action: Just a warning that software or OS is making a call when it shouldn't. SFW will ignore the call when this happen. Need to fix OS or software to not make the SAL_MC_RENDEZVOUS when there is no monarch processor chosen. WBEM EventID: 448. WBEM ProviderName: FPL_IndicationProvider. MC_RENDEZVOUS: No wakeup registered. Probable Cause: OS or Software is calling SAL_MC_RENDEZ without registering a method to wake-up the processor. Recommended Action: OS or Software needs to be fixed to register a wake-up mechanism before calling SAL_MC_RENDEZ. WBEM EventID: 449. WBEM ProviderName: FPL_IndicationProvider. Platform Events 35