HP Integrity rx2800 HP Insight Management WBEM Provider Events Reference Guide - Page 79
firmware. WBEM EventID: 4951. WBEM ProviderName: FPL_IndicationProvider.
View all HP Integrity rx2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
11582 Warning 11583 Warning 11584 Warning 11585 Warning 11586 Warning 11597 Warning 11598 Warning 11599 Warning 11775 Warning 11780 Warning 11783 Warning 11784 Error An unexpected error occurred in SetupNCTable(). Data field: return value from SetupNCTable(). Probable Cause: An error occurred while routing the fabric. Recommended Action: Collect IPMI event logs, and contact your HP support representative to inspect the fabric and system firmware. WBEM EventID: 4946. WBEM ProviderName: FPL_IndicationProvider. Phase4BackToBackPrep() unexpectedly failed. Data field: return value of Phase4BackToBackPrep(). Probable Cause: An error occurred while routing the fabric. Recommended Action: Collect IPMI event logs, and contact your HP support representative to inspect the fabric and system firmware. WBEM EventID: 4947. WBEM ProviderName: FPL_IndicationProvider. Unable to synch graphs between all cells in the partition after an OLA. Data field: (master cell number 56) | (bitmap of cells to synch). Probable Cause: An error occurred while routing the fabric. Recommended Action: Collect IPMI event logs, and contact your HP support representative to inspect the fabric and system firmware. WBEM EventID: 4948. WBEM ProviderName: FPL_IndicationProvider. Data field: bitmap of unreachable cells. Probable Cause: An error occurred while routing the fabric. Recommended Action: Collect IPMI event logs, and contact your HP support representative to inspect the fabric and system firmware. WBEM EventID: 4949. WBEM ProviderName: FPL_IndicationProvider. An unexpected error occurred while setting up the Non-Coherent or Coherent tables after an OLA. Data field: return value from SetupNCTable() or SetupCohTable(). Probable Cause: An error occurred while routing the fabric. Recommended Action: Collect IPMI event logs, and contact your HP support representative to inspect the fabric and system firmware. WBEM EventID: 4950. WBEM ProviderName: FPL_IndicationProvider. ArfRouteEnable() returned an unexpected error while enabling routes to the local cell. Data field: (local cell number 56) | (bitmap of routes to enable). Probable Cause: An error occurred while routing the fabric. Recommended Action: Collect IPMI event logs, and contact your HP support representative to inspect the fabric and system firmware. WBEM EventID: 4951. WBEM ProviderName: FPL_IndicationProvider. ArfRouteDiable() returned an unexpected error while disabling routes during an OLA operation. Data field: (bitmap of cells 32) | (bitmap of routes to disable). Probable Cause: An error occurred while routing the fabric. Recommended Action: Collect IPMI event logs, and contact your HP support representative to inspect the fabric and system firmware. WBEM EventID: 4952. WBEM ProviderName: FPL_IndicationProvider. ArfRouteDiable() returned an unexpected error while disabling routes in ArfPhase4. Data field: (bitmap of source cells 32) | (bitmap of routes to disable). Probable Cause: An error occurred while routing the fabric. Recommended Action: Collect IPMI event logs, and contact your HP support representative to inspect the fabric and system firmware. WBEM EventID: 4953. WBEM ProviderName: FPL_IndicationProvider. SetupInitialCohTables() returned an error. Data field: (cell set 32) | (return value from SetupInitialCohTables()). Probable Cause: An error occurred while routing the fabric. Recommended Action: Collect IPMI event logs, and contact your HP support representative to inspect the fabric and system firmware. WBEM EventID: 4978. WBEM ProviderName: FPL_IndicationProvider. Stable store read or write to flash failed. Probable Cause: Soft error Flash part Failure. Recommended Action: Reboot, if problem persists, contact HP support. WBEM EventID: 5152. WBEM ProviderName: FPL_IndicationProvider. Error reading or writing the stable store NVM area. Probable Cause: A read/write to the NVM stable storage area failed. Recommended Action: Reboot, if problem persists, contact HP support. WBEM EventID: 5153. WBEM ProviderName: FPL_IndicationProvider. FW has detected an illegal memory config using 4GB DIMMs. The system will be halted. Probable Cause: An unsupported memory configuration with 4GB DIMMs is installed in the system. Recommended Action: Refer to the user documentation to determine the supported memory configurations with 4GB DIMMs. WBEM EventID: 5154. WBEM ProviderName: FPL_IndicationProvider. Platform Events 79