HP Integrity rx2800 HP Insight Management WBEM Provider Events Reference Guide - Page 59
Install PMI Handler Failed. Probable Cause: Installation of the FW PMI handler has
View all HP Integrity rx2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
9385 9388 9389 9390 9391 9392 9394 9417 9418 9419 9420 9438 9440 9448 9484 Error Error Error Error Error Error Error Warning Warning Warning Warning Warning Error Error Error Install PMI Handler Failed. Probable Cause: Installation of the FW PMI handler has failed. Recommended Action: Reboot. If problem persists contact your HP representative for support. WBEM EventID: 922. WBEM ProviderName: FPL_IndicationProvider. Cell failed compatibility checks. Probable Cause: CPUs are incompatible with each other. Recommended Action: Contact HP Support personnel to troubleshoot the problem. WBEM EventID: 923. WBEM ProviderName: FPL_IndicationProvider. PDH space not available after release from reset. Probable Cause: A hardware fault has occurred. Recommended Action: Contact HP Support personnel to troubleshoot the Cell Board, Cell Power Board and PDH Daughtercard. WBEM EventID: 924. WBEM ProviderName: FPL_IndicationProvider. MPON failed to release. Probable Cause: A hardware fault has occurred. Recommended Action: Contact HP Support personnel to troubleshoot the Cell Board, Cell Power Board and PDH Daughtercard. WBEM EventID: 925. WBEM ProviderName: FPL_IndicationProvider. Dillon failed to reset. Probable Cause: Hardware failure. Recommended Action: Fix the hardware, pdh riser or cell. WBEM EventID: 926. WBEM ProviderName: FPL_IndicationProvider. DMD clock is not running. Probable Cause: A hardware fault has occurred. Recommended Action: Contact HP Support personnel to troubleshoot the Cell Board, Cell Power Board and PDH Daughtercard. WBEM EventID: 927. WBEM ProviderName: FPL_IndicationProvider. All cpus on the Cell are scheduled to be deconfigured. Probable Cause: All cpus on the cell have been scheduled for deconfiguration. On the next reset, the cell will no longer be operational; system firmware will deconfigure all the cpus and this cell will not be part of a partition. This action is not recommended. To recover, the NVRAM on the PDH card must be cleared, the cell power cycled, and defaults restored from disk. WBEM EventID: 928. WBEM ProviderName: FPL_IndicationProvider. Power has been removed from AC input A0. Probable Cause: A power source has been removed from the chassis. WBEM EventID: 931. WBEM ProviderName: FPL_IndicationProvider. Power has been removed from AC input A1. Probable Cause: A power source has been removed from the chassis. WBEM EventID: 932. WBEM ProviderName: FPL_IndicationProvider. Power has been removed from AC input B0. Probable Cause: A power source has been removed from the chassis. WBEM EventID: 933. WBEM ProviderName: FPL_IndicationProvider. Power has been removed from AC input B1. Probable Cause: A power source has been removed from the chassis. WBEM EventID: 934. WBEM ProviderName: FPL_IndicationProvider. PDHC has detected the PDH battery low warning. Probable Cause: PDH battery power is low. Recommended Action: Replaced the PDH battery. WBEM EventID: 1037. WBEM ProviderName: FPL_IndicationProvider. FW will not handoff to the OS_MCA handler for this MCA event. Probable Cause: The error logs should be retrieved from the EFI shell prompt. WBEM EventID: 941. WBEM ProviderName: FPL_IndicationProvider. The NVRAM block table maintained by System Firmware is corrupt. Probable Cause: The NVRAM-based descriptor for System Firmware NVRAM blocks is corrupt. WBEM EventID: 942. WBEM ProviderName: FPL_IndicationProvider. The link between the CC and SBA failed. Probable Cause: See other associated events for the root cause of the failure. WBEM EventID: 961. WBEM ProviderName: FPL_IndicationProvider. Platform Events 59