HP Integrity rx2800 HP Insight Management WBEM Provider Events Reference Guide - Page 27
Unexpected return to SAL_INIT. Probable Cause: SAL_INIT has been unexpectedly
View all HP Integrity rx2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
5263 5264 5266 5268 5270 5278 5279 5280 5335 5354 5359 5360 5361 5365 5366 Warning Warning Error Warning Warning Warning Error Error Warning Error Error Error Error Error Error OS MCA address not registered. Probable Cause: The OS has not registered an OS_MCA vector. Recommended Action: None, the OS has failed to register the vector or has chosen not to. WBEM EventID: 341. WBEM ProviderName: FPL_IndicationProvider. OS MCA did not correct the Machine Check. Probable Cause: Uncorrected Machine Check. Recommended Action: Analyze cause of Machine Check using diagnostic and EFI tools. WBEM EventID: 342. WBEM ProviderName: FPL_IndicationProvider. Found bad miscellaneous register. Probable Cause: A PDH register has failed. Recommended Action: Reboot if necessary, if problem persists contact your HP representative for support. WBEM EventID: 343. WBEM ProviderName: FPL_IndicationProvider. SAL_CHECK failed for an unknown reason. Probable Cause: The handler for SAL_CHECK has failed for an unknown reason. Recommended Action: Reboot if necessary, if problem persists contact your HP representative for support. WBEM EventID: 344. WBEM ProviderName: FPL_IndicationProvider. SAL_INIT failed for an unknown reason. Probable Cause: The handler for SAL_INIT has failed for an unknown reason. Recommended Action: Reboot if necessary, if problem persists contact your HP representative for support. WBEM EventID: 345. WBEM ProviderName: FPL_IndicationProvider. Unspecified memory interleave error. Probable Cause: FW encountered a fatal interleaving error. Recommended Action: Update SFW. Recommended Action: Contact HP support to troubleshoot the problem. WBEM EventID: 346. WBEM ProviderName: FPL_IndicationProvider. Unexpected return to SAL_CHECK. Probable Cause: Unexpected return to SAL_CHECK. Recommended Action: Reboot if necessary, if problem persists contact your HP representative for support. WBEM EventID: 347. WBEM ProviderName: FPL_IndicationProvider. Unexpected return to SAL_INIT. Probable Cause: SAL_INIT has been unexpectedly returned to. Recommended Action: Reboot if necessary, if problem persists contact your HP representative for support. WBEM EventID: 348. WBEM ProviderName: FPL_IndicationProvider. Firmware is adding a DEGRADED cpu node to the device tree. Probable Cause: A CPU that is not fully functional is installed in the cell board. Recommended Action: Replace cpu indicated in data field of event. WBEM EventID: 349. WBEM ProviderName: FPL_IndicationProvider. PD rendezvous will fail do to a Firmware Tree error. Probable Cause: Decode the ASCII string in the data field to determine what resource is missing. Examine earlier chassis codes to determine why that resource is unavailable. WBEM EventID: 350. WBEM ProviderName: FPL_IndicationProvider. The current cell is not configured as part of the expected set. Probable Cause: A bad complex profile exists. Correct and redistribute. WBEM EventID: 351. WBEM ProviderName: FPL_IndicationProvider. A remote CSR could not be read. Probable Cause: Either a hardware connection problem exists, or fabric was unable to be routed. Verify hardware and reset. WBEM EventID: 352. WBEM ProviderName: FPL_IndicationProvider. The current cell is too late to rendezvous with other cells. Probable Cause: This cell took to long completing previous steps to rendezvous. A bad complex profile could also cause this problem. WBEM EventID: 353. WBEM ProviderName: FPL_IndicationProvider. The current cell detected incompatible CPUs on another cell. Probable Cause: Mixed CPU types are installed in the same partition. Remove them. WBEM EventID: 354. WBEM ProviderName: FPL_IndicationProvider. Current cell was too slow creating the local rendezvous set. Probable Cause: Cell too slow. Could be bad hardware. Check for other errors and reset. Recommended Action: If assistance is required, contact the HP Support Center. WBEM EventID: 355. WBEM ProviderName: FPL_IndicationProvider. Platform Events 27