HP Integrity rx2800 rx2800 i2 User Service Guide - Page 22
Server Specifications, System configuration, Dimensions and weight, HP Generalized Site Preparation
View all HP Integrity rx2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
2 Server Specifications This chapter provides the specifications for the server. For information on general computer room site preparation, see the HP Generalized Site Preparation Guide on the HP website at: http://www.hp.com/go/Integrity_Servers-docs System configuration Table 9 Hardware specifications for the server Component CPUs Memory Server One or two Itanium dual or quad-core CPUs: • 1.6-GHz Dual-core CPU 10-MB cache • 1.46-GHz Quad-core CPU 16-MB cache • 1.73-GHz Quad-core CPU 20-MB cache Supports up to twenty-four Double Data Rate 3 (DDR3) DIMMs mounted on risers that attach to the system board. Supported DIMM sizes are as follows: • 2 GB • 4 GB • 8 GB (future release) • 16 GB (future release) Minimum memory configuration is 4 GB (2 x 2-GB DIMMs). Maximum memory configuration is 96 GB (24 x 4 GB DIMMs).1 Disk drives PCI slots One to eight hot plug SAS hard drives. I/O riser options: • one full height full length PCIe x8 and two low profile PCIe x4 slots • one full height full length PCIe x8 and one low profile PCIe x8 slots SAS core I/O LAN core I/O Eight port SAS core I/O card or eight port SAS core I/O card with internal RAID. Four GigE LAN ports. Management core I/O One serial port, four USB 2.0 ports, one 1G/100/10 LAN port, and twol VGA ports. Optical drive One SATA DVD+RW drive. Power supply One 800 watt (@120 V ac) or 1200 watt (@240 V ac) power supply, 1+1 redundancy with the second power supply. IMPORTANT: 800 W redundancy does not apply to all configurations. 1 384 GB (24 x 16 GB DIMMs) future release Dimensions and weight Table 10 Rack or pedestal-mounted server dimensions Dimensions and weight Data Center Server Dimensions Depth 68.8 cm (27.1 in) Value 22 Server Specifications