HP Integrity rx2800 rx2800 i2 User Service Guide - Page 4

Installing expansion boards 33 Installing a half-length expansion board 33 Installing a full-length expansion board 33 DIMMs...34 Memory configurations 34 Memory riser board locations and slot IDs 34 Supported DIMM sizes 35 Memory loading rules and guidelines 35 Installing DIMMs...36 Installing a CPU...37 CPU load order...38 Installing a CPU and heat sink module 38 Completing installation...44 Installing the server into a rack or pedestal 44 Rack installation...44 HP rack...44 Non-HP rack...44 Pedestal kit installation...45 Connecting server cables...45 AC input power...45 Power states...45 Applying standby power to the server 46 Connecting to the LAN...46 Connecting and setting up the console 46 Setting up the console...46 Connecting to a host console 46 Physical access...46 iLO 3 MP LAN...47 HP-UX...47 Setup checklist...47 Preparation...48 Determining the physical iLO 3 MP access method 48 Determining the iLO 3 MP LAN configuration method 48 Configuring the iLO 3 MP LAN using DHCP and DNS 49 Configuring the iLO 3 MP LAN using the RS-232 serial port 49 Logging in to the iLO 3 MP 50 Additional setup...51 Modifying user accounts and default password 51 Setting up security...51 Security access settings 52 Accessing the host console...52 Accessing the host console with the TUI - CO command 52 Interacting with the iLO 3 MP using the web GUI 52 Accessing the graphic console using VGA 53 Powering on and powering off the server 53 Power states...53 Powering on the server...53 Powering on the server using the iLO 3 MP 54 Powering on the server manually 54 Powering off the server...54 Powering off the server using the iLO 3 MP 54 Powering off the server manually 54 Verifying installed components in the server 55 Installation troubleshooting...57 Troubleshooting methodology 57 4 Contents