HP LH4r HP Netserver LXr 8500 Installation Guide - Page 119
Obtaining Up-to-Date Configuration Details
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Chapter 10 Configuring the HP NetServer You can obtain the Release History and Status Report for your CD-ROM in one of these ways: • Internet WWW--http://www.hp.com:80/netserver/support/news_main.html • Internet FTP--ftp://ftp.hp.com/pub/servers Obtaining Up-to-Date Configuration Details You can find up-to-date configuration information on the Navigator CD-ROM, both in the Readme File and in Configuration Assistant. Use these sources to learn about applicable compatibility issues and get the latest list of HP-tested peripherals and accessories (see the Test Products List in Configuration Advisor). Access the Readme File First This file includes the most recent information that was not included in the printed installation documentation. Follow these steps to view the file. 1. Press the power-on button. 2. Press the CD-ROM drive eject button. 3. Place the HP NetServer Navigator CD-ROM (L-Series) in the drive, and press the *eject button again to close the drive. NOTE *Using the low profile CD-ROM drive is slightly different than full-height units. The disk drawer will spring out only part way when you push the eject button. You must manually pull the drawer open and manually close it after inserting a CD-ROM. 4. Turn the power off, wait 10 seconds, and turn the power on again. 5. If the system fails to boot, follow the diagnostic instructions on the screen. 6. Go to the HP Navigator main menu. 7. If the language of the Navigator screens needs to be changed, select User Preferences and the desired language. After setting the language with User Preferences, you can also change the BIOS language by running the BIOS Flash Update utility found under HP NetServer Utilities on the Navigator CD-ROM. 8. Select Readme File and read it carefully before beginning your installation. 111