HP LH4r HP Netserver LXr 8500 Installation Guide - Page 167
Adjust the HP NetServer's position on the slides to line up the mounting
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 167 highlights
Chapter 13 Alternative Rack Mounting WARNING To prevent the rack from rolling while you mount the HP NetServer, ensure the leveler screws on the rack's lower four corners are in firm contact with the floor. 3. With the help of at least one other person, lift the HP NetServer by its four handles. 4. Move the HP NetServer between the extended slide members to position the slides underneath the HP NetServer's handles on each side. See Figure 13-8. 1. Move NetServer onto slides. 2. Secure NetServer to slides with screws. Figure 13-8. Mounting the Server on the Slides 5. Lower the HP NetServer onto the slide members. The HP NetServer's handles will support the HP NetServer on its slides, temporarily. 6. Adjust the HP NetServer's position on the slides to line up the mounting holes on the side of the chassis with the screw holes in the slide members. 159