HP LH4r HP Netserver LXr 8500 Installation Guide - Page 147
Error Codes and Messages
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
Chapter 12 Troubleshooting 5. Press F10 to save the configuration changes and exit. The HP NetServer reboots and the processor should be re-enabled. Error Codes and Messages This section provides the error codes and messages occurring during POST (Power-On Self Test) and normal operation. The error codes and messages appear on the front control panel's LCD display. l POST Codes - The POST (Power-On Self-Test) codes occur during POST diagnostics and will display a coded error message if an error condition is encountered during the boot process. These codes will also appear on the display monitor, provided it and the supporting circuitry are functioning. l Error Messages - The error messages occur during normal operation. If you get an error message, refer to Table 12-2 later in this chapter. You may also use the following utility to find the error conditions. ◊ Run the Event Log Report Utility. NOTE For a complete list of error messages and solutions refer to Information Assistant on the HP NetServer Online Documentation CD-ROM for the HP NetServer LXr 8500. HP Information Assistant runs on a HP Vectra or other PC running Windows 3.1 and above, Windows 95, 98, or Windows NT. 139