HP LH4r HP Netserver LXr 8500 Installation Guide - Page 120
Running Configuration Assistant and Installation, Assistant
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Chapter 10 Configuring the HP NetServer The Readme file contains the latest information to help you install your HP NetServer LXr 8500. Configuration Assistant Configuration Assistant guides you through the steps necessary to configure the HP NetServer. You can view configuration advisories at one step and change your hardware if necessary. HP Configuration Assistant and Installation Assistant guide you through the steps necessary to configure the HP NetServer. Three methods of configuration are available: Express, Custom, and Replicate. HP Installation Assistant guides you through the NOS installation and configures the NOS with the appropriate drivers for the HP-bundled configuration. If Configuration Assistant detects that a newer version of the BIOS is available on the HP Navigator CD-ROM it will prompt you to update the BIOS. Before you run Configuration Assistant and Installation Assistant, you may need to do one of the following items, using the Symbios (SCSI) Configuration Utility and the Setup Utility (BIOS): • Verify or, if required, modify SCSI host adapter settings. l Use the Symbios Configuration Utility, if required, to low-level format SCSI disks or verify SCSI disk media. Running Configuration Assistant and Installation Assistant Insert the HP NetServer Navigator CD-ROM into the CD-ROM drive. Turn the power off, wait 10 seconds, and turn the power on again. If the system fails to start, follow the instructions on the screen. 1. You may need to set the language, time, and date, when the HP NetServer Navigator starts. 2. If this is true, follow the on screen instructions. You can also change the language of the BIOS error messages by selecting this in the Setup Utility (BIOS) or setting languages in User Preferences and then flashing the BIOS. 3. Go to the HP NetServer Navigator main menu and select Configuration Assistant and Installation Assistant. 112