HP LH4r HP Netserver LXr 8500 Installation Guide - Page 67
If necessary, remove the other memory board to remove the identical
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Chapter 5 Installing Additional Memory 4. Lift the DIMM completely away from the slot. See Figure 5-8. Figure 5-8. Removing a DIMM Module 5. Place the DIMM in its anti-static container. 6. Repeat Steps 2 through 5 to remove any additional DIMMs on the board. NOTE Ensure all retaining clips on the memory board are closed before re-inserting it into the HP NetServer. This includes clips on empty slots as well as those on slots containing DIMMs. 7. If necessary, remove the other memory board to remove the identical DIMMs on it as well. 8. If all DIMMs have been removed, follow Steps 22-30 in "Installing Additional Memory" earlier in this chapter to install the memory board(s) and restore power to the HP NetServer. 59
Chapter 5
Installing Additional Memory
59
4.
Lift the DIMM completely away from the slot. See Figure 5-8.
Figure 5-8. Removing a DIMM Module
5.
Place the DIMM in its anti-static container.
6.
Repeat Steps 2 through 5 to remove any additional DIMMs on the board.
NOTE
Ensure
all
retaining clips on the memory board are closed
before re-inserting it into the HP NetServer. This includes clips
on empty slots as well as those on slots containing DIMMs.
7.
If necessary, remove the other memory board to remove the identical
DIMMs on it as well.
8.
If all DIMMs have been removed, follow Steps 22-30 in "Installing
Additional Memory" earlier in this chapter to install the memory board(s)
and restore power to the HP NetServer.