HP LaserJet Enterprise M5039 HP LaserJet M5039xs MFP - User Guide - Page 44
Initial Setup menu, Networking and I/O
View all HP LaserJet Enterprise M5039 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Initial Setup menu The Initial Setup menu contains the sub-menus shown: ● Networking and I/O menu ● Fax Setup menu ● E-mail Setup menu NOTE: Values shown with "(default)" are the factory-default values. Some menu items have no default. Networking and I/O Table 2-9 Networking and I/O Menu item Sub-menu item Values Description I/O Timeout Select a value in the range. The factory default setting is 15 seconds. I/O timeout refers to the elapsed time before a print job fails. If the stream of data that the device receives for a print job gets interrupted, this setting indicates how long the device will wait before it reports that the job has failed. Parallel Input NOTE: This item appears only if an EIO accessory is installed. High Speed Advanced Functions No Yes (default) Enabled (default) Disabled Use the High Speed setting to configure the speed that the parallel port uses to communicate with the host. Use the Advanced Functions setting to enable or disable bidirectional parallel communication. Embedded Jetdirect See Table 2-10 Jetdirect menus on page 30 for the list of options. EIO Jetdirect Table 2-10 Jetdirect menus Menu item Sub-menu item TCP/IP Enable Host Name Sub-menu item Values and Description Off: Disable the TCP/IP protocol. On (default): Enable the TCP/IP protocol. An alphanumeric string, up to 32 characters, used to identify the device. This name is listed on the HP Jetdirect configuration page. The default host name is NPIxxxxxx, where xxxxxx is the last six digits of the LAN hardware (MAC) address. 30 Chapter 2 Control panel ENWW