HP LaserJet Enterprise M5039 HP LaserJet M5039xs MFP - User Guide - Page 61
Table 2-15, Print Quality menu continued
View all HP LaserJet Enterprise M5039 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Table 2-15 Print Quality menu (continued) Menu item Sub-menu item REt Economode Toner Density Calibration/Cleaning Auto Cleaning Cleaning Interval Auto Cleaning Size Create Cleaning Page Process Cleaning Page Values Description Off Light Medium (default) Enable Resolution Enhancement technology (REt), which produces print output with smooth angles, curves, and edges. All print resolutions, including FastRes 1200, benefit from REt. Dark Enabled Disabled (default) When Economode is enabled, the device prints with a reduced amount of toner per page; however, the print quality of the page is slightly reduced. Choose from a range of 1 Lighten or darken the print on the page. 1 is the lightest to 5. 3 is the default. and 5 is the darkest. Enabled Disabled (default) When auto-cleaning is on, the device prints a cleaning page when the page count reaches the value that is set in Cleaning Interval. 1000 (default) 2000 5000 Set the interval when the cleaning page should be printed. The interval is measured by the number of pages printed. 10000 20000 Letter Select the size of paper used for the cleaning page. A4 Create (button) Generate a page for cleaning excess toner off the pressure roller in the fuser. The page has instructions that guide you through the cleaning process. NOTE: Not available when an automatic duplexer is installed. Process (button) Process the cleaning page that was created by using the Create Cleaning Page menu item. The process takes up to 2.5 minutes. If an automatic duplexer is installed, this item creates the cleaning page and processes it. ENWW Use the Administration menu 47