Kyocera TASKalfa Pro 15000c Pro 15000c Basic Operation Guide - Page 117

Installing and Setting up the Machine > Command Center RX Setting Description POP3 POP3 Protocol Check Interval Run once now Domain Restriction You don't need to set the following items when you only enable the function of sending e-mail from the machine. Set the following items if you want to enable the function of receiving e-mail on the machine. Command Center RX User Guide POP3 User Settings E-mail Send Settings E-mail Size Limit Enter the maximum size of E-mail that can be sent in kilobytes. When E-mail size is greater than this value, an error message appears and E-mail sending is cancelled. Use this setting if you have set E-mail Size Limit for SMTP server. If not, enter a value of 0 (zero) to enable E-mail sending regardless of the size limit. Sender Address*1 Specify the sender address for when the machine sends E-mails, such as the machine administrator, so that a reply or non-delivery report will go to a person rather than to the machine. The sender address must be entered correctly for SMTP authentication. The maximum length of the sender address is 128 characters. Signature Enter the signature. The signature is free form text that will appear at the end of the E-mail body. It is often used for further identification of the machine. The maximum length of the signature is 512 characters. Function Defaults Change the function default settings in [Common/Job Default Settings] page. *1 Be sure to enter the items. 5 Click [Submit]. 3-54