Kyocera TASKalfa Pro 15000c Pro 15000c Basic Operation Guide - Page 424

Setting up from System Menu > Device Settings Item Error Job Skip Auto Error Clear Description Set whether a job for which a "Add paper in cassette #" or "Add paper in Multipurpose Tray" error occurred when the job was started is automatically skipped after a set period of time elapses. Value: Off, On NOTE • When a job is skipped, it is moved to the end of the job queue. • If [On] is selected, set the time until the job is skipped. The setting range is 5 to 90 (5 second increments). If an error occurs during processing, processing stops to wait for the next step to be taken by the user. In the Auto Error Clear mode, automatically clear the error after a set amount of time elapses. Value: Off, On NOTE If you select [On] for Auto Error Clear, set the amount of time to wait before automatically clearing errors. The setting range is 5 to 495 seconds (in 5 second increments). Ink Settings [System Menu/Counter] key > [Device Settings] > [Ink Settings] Item Color Ink Empty Action Low Ink Alert Description Select whether printing is prohibited or the Print in Black and White setting is used for printing once the color ink runs out. Value: Stop printing, Print in Black & White NOTE This setting is not valid when the optional Fiery Controller is installed. Set the amount of remaining ink to notify the administrator when to order an ink when the ink is running low. This notification is used for event report, Status Monitor, SNMP Trap. Value: Off, On NOTE If [On] is selected, set the amount of remaining ink to alert. The setting range is 5 to 100% (in 1% increments). 15-25