Kyocera TASKalfa Pro 15000c Pro 15000c Basic Operation Guide - Page 457

Setting up from System Menu > Security Settings Security Settings Configures security settings. Interface Block Setting [System Menu/Counter] key > [Security Settings] > "Interface Block Setting" This allows you to protect this machine by blocking the interface with external devices such as USB hosts or optional interfaces. Item Description USB HOST This locks and protects the USB port (USB host). Value: Unblock, Block USB Device This locks and protects the USB interface connector (USB Device). Value: Unblock, Block USB Storage This locks and protects the USB Port. Value: Unblock, Block NOTE This function is available when USB HOST is set to [Unblock]. Restart Entire Device Restart the machine without turning the power switch off. After changing "Interface Block Setting", restart the network or turn the machine OFF and then ON. Device Security Settings [System Menu/Counter] key > [Security Settings] > "Device Security Settings" Item Display Status/ Display Jobs Log Detail Status Display Jobs Log Security Level Software Verification Description Specify the display level of detailed job status. Value: Show All, My Jobs Only, Hide All Specify the display level of job log. Value: Show All, My Jobs Only, Hide All Specify the security level. Value Low: This mode is used during maintenance. Do not use normally. High: This is the security setting we recommend. Use this setting normally. Very High: In addition to [High] setting, this setting disables the machine settings to be changed from external command. NOTE This function is available when you have logged in as machine administrator. Verify the extended functions and optional functions. Select [Start Verification] to start verification. If an error occurs during software verification, contact your dealer or service representative. 15-58