Kyocera TASKalfa Pro 15000c Pro 15000c Basic Operation Guide - Page 345

Using Various Functions > About Functions Off Margin Item Left/Right Top/Bottom Back Page Original Orientation Centering Original Orientation Value Description Metric: -18 mm to +18 mm (in 1 mm increments) Inch: -0.75" to +0.75" (in 0.01" increments) Auto, Manual Top Edge on Top, Top Edge on Left, Auto Top Edge on Top, Top Edge on Left, Auto Set the margin width. Enter the margins for "Left/Right" and "Top/ Bottom" by selecting [+] or [-], or by using the numeric keys. The input units can be changed in System Menu. For details, refer to the following: Measurement (page 15-6) For duplex copying, select [Back Page] and select [Auto] or [Manual]. When [Auto] is selected, an appropriate margin is applied automatically on the rear page depending on a margin specified for the front page and a binding orientation. When [Manual] is set, you can set a different margin than the front on the back. Set the margin in the screen that is displayed. The setting selections are the same as for the front. Select the orientation of the original document top edge to scan correct direction. Select [Original Orientation] to choose orientation of the originals, either [Top Edge on Top] or [Top Edge on Left]. Then select [OK]. Select the orientation of the original document top edge to scan correct direction. Select [Original Orientation] to choose orientation of the originals, either [Top Edge on Top] or [Top Edge on Left]. Then select [OK]. NOTE Not displayed when printing from USB drive. Sending/Storing When you have sent/stored the original after specifying the original size and sending/storing size, depending on these sizes, a margin is created at the bottom, left, or right side of paper. By using the Centering function, the image is placed with a margin equally created for all edges. (Value: [Off] / [On]) 13-22