Kyocera TASKalfa Pro 15000c Pro 15000c Basic Operation Guide - Page 149

Using Paper Catalog > Operation When Fiery Controller is Installed Operation When Fiery Controller is Installed Adding/Deleting Paper Brands to/from Paper Catalog The steps for adding or deleting paper brands to/from Paper Catalog when Fiery Controller is installed on the machine are as follows. 1 Register a Paper Entry using Fiery Controller, and set the paper parameters. For details, refer to the Fiery Controller manual. 2 Set the machine adjustment parameters from the machine's Operation Panel. 1 [System Menu/Counter] key > [Device Settings] > [Paper Feeding] > [Paper Catalog] 2 Select the paper brand you registered in step 1. 3 Select [ ] (information icon) > [Edit] > Select and edit adjustment items NOTE Adjustment of the machine itself is effective for the paper brand newly added from Fiery Controller. To adjust the machine itself, refer to the following sections. Preventing Paper Jams (Cassette 1 to 4) (page 5-7) Preventing Paper Jams (Cassette 5 to 8) (page 5-7) Reducing Paper Curl When Outputting to the Right Tray (page 5-8) Reducing Paper Curling When Outputting to the 5,000-sheet Stacker or Finisher (page 5-9) Preventing Image Rubbing (page 5-10) Correcting Paper Skew (page 5-11) Adjusting the Print Position to Correct Image Drift (page 5-13) Adjusting Color Drift (page 5-18) Editing Paper Characteristic Parameters Paper characteristic parameters can be edited using Fiery Controller and Command Center RX. This subsection describes how to edit parameters from Command Center RX. For editing operations from the Fiery controller, refer to the Fiery Controller manual. 1 Display the screen. 1 Launch your Web browser. 2 In the address or location bar, enter the machine's IP address or the host name. Click in the following order to check the machine's IP address and the host name. [Device Information] in the home screen > [More (Detail)] > [Identification/Wired Network] 3 Log in with administrator privileges. 5-5