Kyocera TASKalfa Pro 15000c Pro 15000c Basic Operation Guide - Page 621

Troubleshooting > Other Trouble S Message Checkpoints Corrective Actions Reference Page Scanner memory is - full.*1 Scanning cannot be performed - due to insufficient memory of the scanner. Follow the instructions on the screen. Send error.*1 - An error has occurred during transmission. The job is canceled. Select [End]. Refer to Responding to Send Error for the error code and corrective actions. page 19-54 Skewed originals or - multi originals fed at once. See the caution attached on the - document processor and check the originals. If the originals are jammed, follow the instructions on the screen to remove the originals. Staple is empty. *1 Has the staple cartridge holder run out of staples? If the staples are depleted, the machine will stop and the location of staple depletion will be indicated on the screen. Leave the machine on and follow the instructions to replace the staple case. Select [Continue] to print without stapling. Select [Cancel] to cancel the job. page 17-21 page 17-23 Staple is empty. (Manual Staple) Has staple cartridge holder A run out of staples? Add staples to staple cartridge page 17-21 holder A. Staple jam. - If a staple jam occurs, the machine will stop and the location of the jam will be indicated on the screen. Leave the machine on and follow the instructions to remove the jammed staple. page 19-40 System error. - System error has occurred. - Follow the instructions on the screen. *1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses. For details on Auto Error Clear, refer to the following: Auto Error Clear (page 15-25) 19-68