Kyocera TASKalfa Pro 15000c Pro 15000c Basic Operation Guide - Page 212

Paper Handling > Loading Paper Loading Paper in the Multipurpose Tray For details of the supported paper sizes, refer to the following: Precautions of Special Paper (page 7-13) For the paper type setting, refer to the following: Paper Feed Settings (page 15-19) Be sure to use the multipurpose tray when you print on any special paper. IMPORTANT If you are using a paper weight of 106 g/m2 or more, set the media type to Thick and set the weight of the paper you are using. The capacity of the multipurpose tray is as follows. • A4 or smaller plain paper (80 g/m2): 150 sheets • A4 or larger plain paper (80 g/m2): 50 sheets • Thick paper (300 g/m2): 10 sheets • Thick paper (209 g/m2): 10 sheets • Thick paper (200 g/m2): 10 sheets • Thick paper (163 g/m2): 50 sheets • Thick paper (157 g/m2): 50 sheets • Thick paper (104.7 g/m2): 50 sheets • Inkjet paper: 10 sheets • Inkjet matte paper: 10 sheets • Banner paper: 470.1 mm (18.51") to a maximum of 1220.0 mm (48"): 1 sheet (manual feed), 10 sheets (when optional banner tray is attached) • Index tab dividers: 15 sheets NOTE • When you load custom size paper, enter the paper size by referring to the following: Paper Feeding (page 15-12) • When you use special paper such as thick paper, select the media type by referring to the following: MP Tray Settings (page 15-16) • Paper size can be automatically detected and selected, refer to the following: Paper Selection (page 13-4) MP Tray Settings (page 15-16) 7-28