Kyocera TASKalfa Pro 15000c Pro 15000c Basic Operation Guide - Page 169

Using Custom Paper > Setting from the Operation Panel Setting from the Operation Panel Setting the Paper If you will use a paper that is not registered in Paper Catalog, follow the steps below to set the paper. 1 Display the screen. [System Menu/Counter] key > [Device Settings] > [Paper Feeding] 2 Select the paper source. Select from [Cassette 1 (to 8) Settings] or [MP Tray Settings]. 3 Select the paper size. [Manual] > [Paper Size] When [Auto (Metric)] or [Auto (Inch)] is selected, the paper size is automatically detected and selected. NOTE • Paper sizes that can be used in Cassettes 3 and 4 are A4, Letter, and B5. To set the paper size, consult an experienced user or your service technician. • Paper sizes that can be detected by a cassette are A3, A4, A5, A6, B4, B5, B6, Ledger, Letter, Legal, Statement, and Folio. 4 Select the paper type. NOTE To print on preprinted paper, prepunched paper, letterhead, or inkjet matte paper, refer to the following section: Special Paper Action (page 15-20) 5 Select the paper weight. You can specify the weight for each selected paper type. CAUTION Do not select [None] for the weight. This may cause paper jams. If the paper weight is not set correctly, ink splashing or color drift may occur on the paper. In addition, the paper may contact the print head and cause a paper jam. 6-3