Kyocera TASKalfa Pro 15000c Pro 15000c Basic Operation Guide - Page 460

Setting up from System Menu > Security Settings System Stamp [System Menu/Counter] key > [Security Settings] > "System Stamp" Printing Jobs [System Menu/Counter] key > [Security Settings] > "System Stamp" [Printing Jobs] Configure settings for stamps when a document is printed. After configuring the setting, return to the Copying Functions or Custom Box (Printing a Document) screen from System Menu, and select the [Reset] key. Text Stamp Item Text Stamp Edit Text Stamp Method Position Position Nudge Back Page Rotation Description Select whether to print a text stamp on all sending jobs. Value: Off, On NOTE When [On] is selected, the Text Stamp settings cannot be changed when sending. Select a text string to be stamped from templates, or enter a maximum of 32 characters for the text string. NOTE Templates that have been set will appear. For details on registering templates, refer to the following: Text (Text Stamp) (page 15-37) Select the text stamp method. Value: Each Print Page, Each Original Page Set the text stamp position. Value: Top Left, Top Middle, Top Right, Middle Left, Center, Middle Right, Bottom Left, Bottom Middle, Bottom Right NOTE Specify the detailed stamp position using numeric values, and to set the stamp angle. Set the nudge. Value: Top/Bottom: -10 to 10 mm (in 1 mm increments) Left/Right: -10 to 10 mm (in 1 mm increments) Set the text stamp position when a page number is placed on the back side of the paper in duplex printing. Value: Same as Front Page, Mirror Front Page Set how many degrees you want to rotate the stamp from the left or right. You can enter the angle from 0 to 359 degrees. 15-61