Kyocera TASKalfa Pro 15000c Pro 15000c Basic Operation Guide - Page 347

Using Various Functions > About Functions Item Off Border Erase Border Sheet Value Metric: 0 mm to 50 mm (in 1 mm increments) Inch: 0.00" to 2.00" (in 0.01" increments) Back Page Same as Front Page, Do Not Erase Border Erase Book Border Border Gutter Metric: 0 mm to 50 mm (in 1 mm increments) Inch: 0.00" to 2.00" (in 0.01" increments) Back Page Same as Front Page, Do Not Erase Individual Border Erase Border Top Bottom Left Metric: 0 mm to 50 mm (in 1 mm increments) Inch: 0.00 to 2.00" (in 0.01" increments) Right Back Page Same as Front Page, Do Not Erase Original Orientation Top Edge on Top, Top Edge on Left, Auto Description Set the border erase width. Set the value by selecting [+] or [-], or by using the numeric keys. The input units can be changed in System Menu. For details, refer to the following: Measurement (page 15-6) For 2-sided originals, select [Back Page] and then select [Same as Front Page] or [Do Not Erase]. Set the border erase width. Set the value by selecting [+] or [-], or by using the numeric keys. The input units can be changed in System Menu. For details, refer to the following: Measurement (page 15-6) For 2-sided originals, select [Back Page] and then select [Same as Front Page] or [Do Not Erase]. Set the border erase width. Set the value by selecting [+] or [-], or by using the numeric keys. The input units can be changed in System Menu. For details, refer to the following: Measurement (page 15-6) For 2-sided originals, select [Back Page] and then select [Same as Front Page] or [Do Not Erase]. Select the orientation of the original document top edge to scan correct direction. Select [Original Orientation] to choose orientation of the originals, either [Top Edge on Top] or [Top Edge on Left]. Then select [OK]. 13-24