Kyocera TASKalfa Pro 15000c Pro 15000c Basic Operation Guide - Page 157

Using Paper Catalog > Operation When Fiery Controller is Installed Adjusting the Print Position to Correct Image Drift If the starting image print position is off, or the starting print positions on the front and back sides are not aligned in twosided printing, you can adjust the timing of the starting print position in the direction perpendicular to the paper movement direction. This is referred to as "Starting Timing Adjustment". If the center of the printed image does not match the center of the paper, you can move the printed image along the paper movement direction to align the center of the image with the center of the paper. This is referred to as "Centering Correction". IMPORTANT The print position on paper registered in the Master Paper Catalog cannot be adjusted. 1 Display the screen. [System Menu/Counter] key > [Device Settings] > [Paper Feeding] > "Cassette Settings" [Cassette 1 (to 8) Settings] > [Paper Catalog] 2 Select the paper brand > [ ] (information icon) > "Adjustment Items" [Print Chart/Help] > "Print Chart" [Print] A test chart is printed. 3 Measure the correct value of front side. 1 Place the chart face printed as "FR" face up. FR LA1 CT1 PT1 MS1 LA2 2 Valley fold the chart along the horizontal line at the top of the chart. CT2 LA1 PT1 LA2 5-13