Kyocera TASKalfa Pro 15000c Pro 15000c Basic Operation Guide - Page 366

Using Various Functions > About Functions Item Value Description On Numbering Default 1 to 9999999 Set the starting consecutive number. To set the number of digits (1 to 7) of the consecutive number, select [Fixed Digit Number] > [On]. This appears if you selected [Numbering] in "Stamp". Position Position Top Left, Top Middle, Top Right, Middle Left, Center, Middle Right, Bottom Left, Bottom Middle, Bottom Right Set the print position of the stamp. Select [Position] and select the text stamp print position. You can set stamp position details. Nudge Top/Bottom: -10 to +10 mm Left/Right: -10 to +10 mm Fine adjust the position of the stamp. Font Font Courier, Letter Gothic Set the font of bates stamp. Size Registered font sizes Set the font size of bates stamp. For details on registering font sizes, refer to the following section. Font Size (Bates Stamp) (page 15-37) Color Cyan, Magenta, Yellow, Red, Set the color of the bates stamp. Green, Blue, Black Style None, Bold, Italic, Bold/Italic Set the font style of bates stamp. Select a font style by checking the checkbox. Display Pattern Clipping, Overwrite Set the display method of the bates stamp. Density 10 to 100% (in 10% increments) Set the density of bates stamp color. Set the value by selecting [+] or [-]. Original Orientation Top Edge on Top, Top Edge on Left, Auto Select the orientation of the original document top edge to scan correct direction. Select [Original Orientation] to choose orientation of the originals, either [Top Edge on Top] or [Top Edge on Left]. Then select [OK]. 13-43