Kyocera TASKalfa Pro 15000c Pro 15000c Basic Operation Guide - Page 71

Installing and Setting up the Machine > Default Settings of the Machine Default Settings of the Machine The default settings of the machine can be changed in System Menu. Before using this machine, configure such settings as date and time, network configuration, and energy saving functions as needed. NOTE For settings that are configurable from System Menu, refer to the following: Setting up from System Menu (page 15-1) Setting Date and Time Follow the steps below to set the local date and time at the place of installation. When you send an E-mail using the transmission function, the date and time as set here will be printed in the header of the E-mail message. Set the date, time and time difference from GMT of the region where the machine is used. NOTE • To make changes after this initial configuration, refer to the following: Date/Time (page 15-6) • The correct time can be periodically set by obtaining the time from the network time server. Command Center RX User Guide 1 Display the screen. [System Menu/Counter] key > [Device Settings] > [Date/Time] 2 Configure the settings. [Date and Time] > [Date Format] > [Time Zone] Item Date and Time Date Format Time Zone Description Set the date and time for the location where you use the machine. If you perform Send as E-mail, the date and time set here will be displayed on the header. Value: Year (2000-2035), Month (1-12), Day (1-31), Hour (00-23), Min. (00-59), Second (00-59) Select the display format of year, month, and date. The year is displayed in Western notation. Value: MM/DD/YYYY, DD/MM/YYYY, YYYY/MM/DD Set the time difference from GMT. Choose the nearest listed location from the list. If you select a region that utilizes summer time, configure settings for summer time. 3-8