Kyocera TASKalfa Pro 15000c Pro 15000c Basic Operation Guide - Page 229

Paper Handling > Loading Paper To load paper larger than A4-R or 81/2 x 11-R, pull out the extension tray. Insert the paper along the paper width guides into the tray until it stops. After removing new paper from its packaging, fan the paper before loading it in the multipurpose tray. Precautions on Paper (page 7-8) CAUTION Adjust the paper width guide so that there are no gaps between the guide and the paper. Any part of the paper that is out of place may fold, contact the print head, and cause print head damage, skewed feeding, or a paper jam. IMPORTANT • Load the paper with the print side up. • Do not use paper with burring. • Before loading paper in the multipurpose tray, check that there is no paper remaining in the tray from a previous job. If there is just a small amount of paper remaining in the multipurpose tray and you want to add more, remove the remaining paper from the tray and combine it with the new paper before loading in the tray. • Ensure that the loaded paper does not exceed the paper limit mark. 2 Move the paper length guide to fit the paper. 7-45