Lantronix X300 Series X300 Series User Guide Rev B - Page 104

10: Services Data Format Figure 10-1 shows a portion of the reporting agent data format for a case where all settings were selected. Figure 10-1 Reporting Agent Data Format (excerpt) @IMEI=352948070039411,Lan Status=Connected,Lan IP(IPv4)=192.168.1.1,Lan Uptime(Seconds)=329501,Lan TX bytes=572260469,Lan RX bytes=117212098,Wan Status=Connected,Wan IP(IPv4)=192.169.1.110,Wan Uptime(Seconds)=329389,Wan gateway=192.169.1.1,Wan DNS=27.109.1.2 27.109.1.3,Wan TX bytes=75455301,Wan RX bytes=344481735,Cellular Status=Enabled,Cellular IP(IPv4)=,Cellular uptime(Seconds)=,Cellular gateway=,Cellular DNS=,Cellular TX bytes=208,Cellular RX bytes=0,RSSI(ASU)=99,Roaming Status=N/ A,Operator Name=N/A,Network Status=Not Registered,IMSI=ERROR,Wifi Status=Enabled,Wifi IP(IPv4)=192.169.2.116,Wifi Uptime(Seconds)=383,Wifi gateway=192.169.2.1,Wifi DNS=192.169.2.1,Wifi TX bytes=14135074,Wifi RX bytes=34397774,Wifi Client Service Actions Services > Service Actions This page displays a list of the available services and allows you to manage the system resources. You can start, stop, reload, or restart the service; and enable or disable automatic startup of the service when the device is rebooted. Note: Use caution when changing the state of services as it may cause loss of network connectivity and data. Some features may stop working and the device may become unstable. Figure 10-2 Service Actions X300 Series IoT Cellular Gateway User Guide 104