Lantronix X300 Series X300 Series User Guide Rev B - Page 136
UMTS/GPRS/EV-DO Cellular, describes the UMTS/GPRS/EV-DO Cellular protocol settings.
View all Lantronix X300 Series manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
11: Network Parameters LCP echo interval Host-Uniq tag content Inactivity timeout Override MTU Physical Settings Bridge Interfaces Interface Firewall Settings Create/Assign firewall -zone Description The LCP echo interval in seconds. LCP echo failure threshold must be set, otherwise this value is ignored. Enter the custom Host-Uniq tag to be used. Enter the inactivity timeout in seconds, Close the connection if the timeout is reached or enter zero (0) to ignore inactivity timeout. Enter MTU size in bytes. The default is 1500 bytes. Click to enable creating a bridge over multiple interfaces. Enable STP - Check to enable the Spanning Tree Protocol over the bridge. Enable IGMP snooping - Check to enable IGMP snooping on the bridge. Select the interface to be configured. Select more than one interface, if parameter creating a bridge over multiple interfaces is enabled. Select the firewall zone to be assigned to the interface. Select unspecified - or - create to remove the interface or assign a new zone to the interface respectively. Enter the name of the new zone in the text box and click Save & Apply button. UMTS/GPRS/EV-DO Cellular Table 11-8 describes the UMTS/GPRS/EV-DO Cellular protocol settings. Table 11-8 UMTS/GPRS/EV-DO Cellular Protocol Settings Parameters General Settings Protocol Description Modems using the UMTS/GPRS/EV-DO protocols Bring up on boot Allows the interface to be live after every reboot. Bring up on boot is checked by default. Modem device Displays the modem device SIM to use Advanced Settings Use builtin IPv6 -management Force link Indicates which SIM to use, Embedded SIM or External SIM Allows to use the built in IPv6 management configuration. Select this option to assign interface properties regardless of the link being active or not. If not selected, items are assigned only after the link has become active. Default is not selected. Obtain IPv6-Address Click to enable IPv6 negotiation on PPP link. X300 Series IoT Cellular Gateway User Guide 136