Lantronix X300 Series X300 Series User Guide Rev B - Page 89
External Filesystems, Services > External Filesystems
View all Lantronix X300 Series manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
10: Services External Filesystems Services > External Filesystems The X300 series gateway supports an SD(HC)/MMC card or external USB flash drive for external file storage. This page configures the mount settings for the external filesystem. To configure the external filesystem: 1. Insert the SD card in the SD card slot or the USB flash drive in the USB slot on the gateway. 2. Go to Services > External Filesystems. 3. Configure the external device settings. See Table 10-5. 4. Click Save & Apply. Parameters External device Mount point Auto mount Options Table 10-5 External Filesystems Configuration Description Select the external device. Enter the mount point directory to the file system, relative to the top level directory. Example: /tmp/usbdevice Select to mount the device automatically when the gateway boots. If unselected, the device must be mounted manually. Enter the Linux mount options to be run when the device is mounted. Separate each of the options with a comma. Default mount option: rw, sync X300 Series IoT Cellular Gateway User Guide 89