Lantronix X300 Series X300 Series User Guide Rev B - Page 159
Diagnostics, Network > Diagnostics
View all Lantronix X300 Series manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
11: Network Diagnostics Network > Diagnostics This page lets you run The diagnostics feature allows you to run network utilities and cable diagnostics commands from the web interface. Table 11-22 describes each of the network utilities. Table 11-23 describes the cable diagnostics status messages. Note: The cable diagnostics command will bring down the Ethernet port link, which will take more time to complete the test. Cable diagnostics is only accurate for cable lengths of 7 - 120 meters. Network Utility Ping Traceroute Nslookup Table 11-22 Diagnostics - Network Utilities Description IP Address or fully qualified domain name to be pinged. Ping determines network connection between gateway and host on the network. The output shows if the response was received, packets transmitted and received, and packet loss if any. IP Address or fully qualified domain name Traceroute displays all the routers present between the destination IP address and the gateway. The output shows all the gateways through which data packets pass on way to the destination system from the source system, maximum hops and total time taken by the packet to return measured in milliseconds. IP Address or fully qualified domain name that needs to be resolved. Name lookup is used to query the Domain Name Service for information about domain names and IP addresses. It sends a domain name query packet to a configured domain name system (DNS) server. If you enter a domain name, you get back the IP address to which it corresponds. If you enter an IP address, you get back the domain name to which it corresponds. A message stating "Unknown Host" indicates that the Internet Name does not exist. Table 11-23 Cable Diagnostics Status Messages Status message No cable faults detected Open circuit detected in cable Open circuit detected in cable Distance to cable fault is ~ meter(s). Short circuit detected in cable. Distance to cable fault is ~ meter(s). Description The cable link is good. There is no cable. Open ended cable. There is an issue with the cable. X300 Series IoT Cellular Gateway User Guide 159