Lantronix X300 Series X300 Series User Guide Rev B - Page 172

11: Network Parameters Ping timeout Ping interval Interface down Interface up Metric Description Enter the time to wait for a response to ping request sent before declaring the interface unreachable. The wait time is in seconds. The default value depends on the interface used. Cellular will have different values to reduce data consumption. Specifies the time in seconds between sending ping packets. The default ping interval is 5 seconds. The number of consecutive failed attempts after which the interface is declared down. The default value depends on the interface used. Cellular will have different values to reduce data consumption. The number of consecutive successful attempts to determine the reliability of the network connection through the interface. The default value depends on the interface used. Cellular will have different values to reduce data consumption. Displays the Interface Metric. The route with least metric is considered as best route. The default metric assigned to the interface is 1. For load balancing between two interfaces, both the interfaces must have the same metric value on the Member configuration page. Members Network > Load Balancing > Members MWAN Members are profiles corresponding to individual interfaces where you can set metric and weight. To view and add MWAN members: 1. Go to Network > Load Balancing > Members. 2. The MWAN Members table is displayed. See Table 11-34. 3. To add a member profile, at the bottom of the table enter the name and click Add. 4. Enter the settings. See Table 11-35. 5. Click Save & Apply. Parameters MWAN Members Name Interface Table 11-34 MWAN Members Description Displays the members and provides options to add, edit, or delete items from the table.  Enter a name and click Add to add member.  Click Edit to modify a table entry.  Click Delete to delete an entry from the table.  The buttons to the left of the Edit button can be used to reorder the items in the list. This does not change the configuration. Displays the interface member notation number. Displays the name of the interface associated with the member. X300 Series IoT Cellular Gateway User Guide 172