Lantronix X300 Series X300 Series User Guide Rev B - Page 174

11: Network 2. The MWAN Policies table is displayed. See Table 11-36. 3. To add a policy, at the bottom of the table enter the name and click Add. 4. Enter the settings. See Table 11-37. 5. Click Save & Apply. Parameters MWAN Policies Name Members assigned Last resort Errors Table 11-36 MWAN Policy Description Displays the policies and provides options to add, edit, or delete items from the table.  Enter a name and click Add to add policy.  Click Edit to modify a table entry.  Click Delete to delete an entry from the table. Name of the policy. The name must be 15 characters or less, and may contain characters A-Z, a-z, 0-9, _ and no spaces. Policies must not share the same name as configured interfaces, members or rules. Interface members to which the policy is applied. Displays the failover routing behavior when all WAN policy members are offline. Displays if an error has occurred during the Policy configuration. Error messages are displayed as warnings. Edit MWAN Policy To edit MWAN policy: 1. Go to Network > Load Balancing > Policies. 2. Select the policy and click Edit. 3. Modify the configuration settings. See Table 11-37. 4. Click Save & Apply. Parameters Member used Last Resort Table 11-37 MWAN Policy Configuration Description Select the interface to apply the policy on for traffic passing through the interface. Select the failover routing behavior when all WAN policy members are offline. Available options:  unreachable (reject)  blackhole (drop)  default (use main routing table) X300 Series IoT Cellular Gateway User Guide 174