Lantronix X300 Series X300 Series User Guide Rev B - Page 65
Language and Style, Administration, Router Password, SSH Access
View all Lantronix X300 Series manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
8: System Parameters Provide NTP server Use DHCP advertised servers NTP server candidates GSM Time Synchronization Description This option enables the NTP server on the gateway. The service will respond to the local network with the time of the gateway. To run as NTP server, open UDP port 123. Disabled by default. Enables or disables the use of DHCP-provided NTP servers. Enabled by default. Enter the pool of NTP servers to poll the time from. If enabled, the gateway will synchronize using GSM functionality. Language and Style System > System > Language and Style The language and style settings are used to control the look and feel of the web interface. Table 8-4 Language and Style Configurations Parameters Language Design Description Default value is auto. Default design of user interface is Rosy. Auto refresh default pollinterval Set the auto refresh polling interval between 5 and 50 seconds. in seconds Default is 5 seconds. Note: Auto refresh can be turned on or off using the Auto Refresh button on the UI. Administration System > Administration The Administration page allows you to configure the unit's password and SSH access to the device. You can configure various ports and login security. Router Password System > Administration > Router Password This page allows you to change the login password of the current user. If you are logged in as administrator, you can change the administrator password, and if you are logged in as root, you can change the root password and the administrator password. To change the password: 1. Go to System > Administration. 2. Type the new password and retype it to confirm. 3. Click Save. SSH Access X300 Series IoT Cellular Gateway User Guide 65