Lantronix X300 Series X300 Series User Guide Rev B - Page 25
LEDs, Color, Status, Description, Connection Name
View all Lantronix X300 Series manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Figure 2-6 X304 model Back View 2: Introduction 1 ID Connection Name 1 Cellular antenna 2 GNSS antenna 3 External SIM slot 23 4 5 ID Connection Name 4 microSD card slot 5 Cellular antenna LEDs Table 2-3 describes the device status LEDs for X303 and X304 models, as shown in Figure 2-2. Name Alert Activity Network Signal SIM Wi-Fi Power Color Red Amber Amber Amber Blue Blue Green Table 2-3 Top Panel LEDs Status Description OFF No alert, device is running smoothly Flashing Cellular module reboot, Linux kernel booting ON Hardware fault OFF Cellular data service is not connected Flashing Data sent and received over cellular connection ON Cellular data service is connected OFF Device is not registered on a cellular network Flashing Registered on roaming cellular network ON Registered on home cellular network OFF No signal (CSQ=0 to 5, 97, 98, 99) Flashing Weak signal (CSQ > 6 to 12) ON Strong signal (CSQ ≥ 6 to 12) OFF SIM not in use Flashing External SIM is in use ON Embedded SIM is in use OFF Wi-Fi network is inactive Flashing Wi-Fi network connection traffic ON Wi-Fi network link is up and active OFF Power off ON Power on X300 Series IoT Cellular Gateway User Guide 25