Lantronix X300 Series X300 Series User Guide Rev B - Page 177
: Bluetooth, Bluetooth Settings, Con Bluetooth settings, Scan for and Pair a Device
View all Lantronix X300 Series manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 177 highlights
12: Bluetooth The X300 series gateways support dual-mode Bluetooth BR/EDR (Classic Bluetooth) and BLE wireless connectivity. The Serial Port Profile (SPP) is included for Bluetooth BR/EDR. Bluetooth SPP allows two Bluetooth devices to connect and exchange serial data using the Bluetooth SPP profile for tunneling. Bluetooth Settings The Bluetooth Settings page lets you configure Bluetooth settings and scan for and pair to Bluetooth devices. Configure Bluetooth settings To configure Bluetooth settings: 1. Go to Bluetooth > Settings. 2. Next to Bluetooth State, select or clear the box to enable or disable Bluetooth. 3. Enter the configuration settings. See Table 12-1. Table 12-1 Bluetooth Settings Configuration Parameters Bluetooth State Device name Device Address Paired devices Allow Discovery Scan Description Select to enable or clear to disable Bluetooth. Displays the Bluetooth device name. The name can be edited. Note: Changing the device name will disconnect any existing Bluetooth SPP master or slave connections. Displays the Bluetooth device address. Displays the paired devices. Click Unpair to unpair the device. Select to allow the gateway to be visible to other Bluetooth devices during a scan. Clear the box if you do not want the gateway to be visible to other Bluetooth devices during a scan. Click Scan to scan for nearby discoverable Bluetooth devices. A device must be discoverable in order to pair to it. 4. Click Save & Apply. Scan for and Pair a Device To scan for and pair to nearby devices: 1. On the Bluetooth Settings page under Scan, click Scan. The scan will take a few seconds to complete. 2. The Bluetooth Scan Result page shows the discovered devices and contains the following details: X300 Series IoT Cellular Gateway User Guide 177