Lantronix X300 Series X300 Series User Guide Rev B - Page 165
Add Traffic Rule, Go to Network > Firewall > Traffic Rules.
View all Lantronix X300 Series manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
11: Network Parameters Action Enable Edit Delete Add Description Action to be taken on the traffic when the rule conditions are satisfied. Indicates whether the rule is for incoming, forwarded, or outgoing traffic. Select the box to enable the traffic rule. If the rule is enabled, clear the box to disable the rule. Click to edit the traffic rule settings. Click to delete the traffic rule. Click to add a new traffic rule. This button appears at the bottom of the Traffic Rules page. Add Traffic Rule To add a traffic rule: 1. Go to Network > Firewall > Traffic Rules. 2. At the bottom of the Traffic Rules table, click Add. 3. Enter the configuration settings. See Table 11-29. 4. Click Save. Parameters General Settings Name Protocol Source zone Source address Source port Destination zones Destination address Destination port Action Advanced Settings Table 11-29 Firewall Traffic Rule Configuration Description Enter the name of the traffic rule. Select the protocol from the available options. Available options TCP - Allows only TCP traffic to the open port UDP - Allows only UDP traffic to the open port TCP+UDP - Allows both TCP and UDP traffic to the open port Select the traffic source zone. This is usually WAN zone. Match incoming traffic from the specified source IP address Match incoming traffic from the specified source port Select the destination firewall zone. If specified the rule applies to forwarded traffic, otherwise it is treated as an input rule. Match incoming traffic directed to the specified destination IP address. If no destination zone is specified, the rule is treated as an input rule. Match incoming traffic directed to the specified destination port. Sets the target parameter to indicate the firewall action. Options include: Accept Reject Drop Mark Notrack. X300 Series IoT Cellular Gateway User Guide 165