Lantronix X300 Series X300 Series User Guide Rev B - Page 54

7: Status Wireless Status The Wireless section describes the status of the Wi-Fi network used by the gateway and the Wi-Fi associated stations. Parameters Connection Name Associated Stations Network MAC Address Host Signal/Noise RX Rate/Tx Rate Disconnect Table 7-8 Wireless Status Overview Description Name of the connection and the details:  Type - The wireless radio chipset  Channel - Wi-Fi channel  Bitrate - Data transfer rate  SSID -Service Set Identifier (SSID) that uniquely names a wireless local area network (WLAN)  Mode - Displays whether the WLAN interface is currently configured as an access point (Master) or as a client of a higher order Wi-Fi network. Note: For Wi-Fi WAN (WWAN) operation, the connection mode should be 'Client'.  BSSID - Displays Basic Service Set Identification (BSSID); 24 bit MAC address of wireless device.  Encryption - Displays the data encryption method.  Associations - Displays the number of associated stations. Mode and name of the network to which the device is connected MAC address of the computers and/or devices that are connected Host name of the associated station Signal strength/noise in dBm The receive (RX) and transmission (TX) data rates of the associated client. Displays data transfer rate (Mbit/s), channel bandwidth (MHz), Modulation and Coding Scheme index (MCS), and GI time (Guard Interval, for TX rate). Click to disconnect the associated station from the access point. Dynamic DNS Status The Dynamic DNS section shows the Dynamic DNS IPv4 and IPv6 configuration. X300 Series IoT Cellular Gateway User Guide 54